- Gravity feed multi angle adjustable side cup
- Fluid flow adjuster on end of handle
- Fluid nozzle - 0.25 mm
- Working pressure - 15-30 psi
- Capacity of cup - 7 cc
- Supplied in plastic case complete with: Adjusting spanner, Pipette, Barbed hose connector
With a double-action trigger to precisely control the air /paint mix, this professional quality airbrush is particularly suitable for detail design work. It is of all metal construction.
The handle an adjustable stop to enable the regulation of liquid flow, allowing repeatable line widths to be produced.
Applications include, Model Painting, Body Art, Hobby and Craft, Fine Art, Car painting, Photo Retouching, Illustrations, Textiles and T-shirt painting.
This is a double action type of airbrush, where pressing the trigger turns on the air and pulling the trigger operates the needle/tip valve, which controls how much paint is released. These can work down to very fine lines (1mm or less) when you have reached the required skill level. The largest spray pattern is approx 40mm dependant on distance from the surface to be sprayed.
This airbrush has internal rubber seals and is not suitable for use with Solvent Based Paints.