This is a combined filter/regulator with pressure gauge used for controlling the pressure output of your airbrush compressor & preventing moisture from damaging your work.
Only suitable for use with On-Demand Compressors.
Suitable for most Sparmax, Euro-Tec & Iwata Compressors.
- 1/8 BSP Female Inlet with Flange Nut (9mm Diameter)
- Twin 1/8 BSP Male Outlets (9mm Diameter)
- 1/8″ BSP Blanking Cap
- 100 PSI (7 BAR) Pressure Gauge
- 50 Micron Filter
- One-Touch Water Drain
- Push Lock Pressure Control