This completed kit comes with an Twin Piston on-demand compressor, 1.8 metre braided air hose and a gravity feed AB-130 airbrush and airbrush stand.
An excellent starter kit for modelling or any of the following applications: Hobby and Craft, Fine Art, Illustration and many other fine detail airbrushing applications.
Royal Max TC-90T Twin Piston Compressor with 3 Litre Air Reciever
The TC-90T has a 3.0 litre receiver tank that has its pressure maintained automatically by the compressor. With a dual position switch, it is possible to select 2 modes of operation: In position 1,once it has reached an output pressure of 57 PSI it shuts off automatically and restarts when required. In position 2, the compressor will run continuously and reach a maximum pressure of 87 PSI.
Compact, portable and quiet (59db) it provides an oil free air supply that is ideal for designers, modellers, artists, cake decorators, nail art and spray tanning.
Quiet (59db) – can be used unobtrusively in the home
Maintenance free oil-less twin cylinder piston design with lightweight aluminium construction
3.0 litre Receiver tank – ensures pulse free output
Constant pressure and Zero pulsation
Auto stop and start: Stops at 57 PSI, Starts at 35 PSI
Pressure gauge and Professional Regulator – fully adjustable to 0 psi
Water trap and air filter
Ideal for all airbrushes
- Motor – 240V 60Hz 1Ph
- Power rating – 150W
- Air tank: 3.0L
- Maximum pressure – 87 psi
- 1/8 BSP male outlet
- Air displacement – 30 litres/min
- Weight – 7.2kg
European customers can connect to EU mains by purchasing the following UK to EURO plug adaptor
AB-130 Gravity Feed Airbrush
With a double-action trigger to precisely control the air /paint mix, this professional quality airbrush is particularly suitable for detail design work. It is of all metal construction.
The handle has an adjustable stop to enable the regulation of liquid flow, allowing repeatable line widths to be produced.
Applications include, Model Painting, Body Art, Hobby and Craft, Fine Art, Car painting, Photo Retouching, Illustrations, Textiles and T-shirt painting.
This is a double action type of airbrush, where pressing the trigger turns on the air and pulling the trigger operates the needle/tip valve, which controls how much paint is released. These can work down to very fine lines (1mm or less) when you have reached the required skill level. The largest spray pattern is approx 40mm dependant on distance from the surface to be sprayed.
- Gravity feed cup
- Fluid flow regulating screw on handle end
- Fluid nozzle – 0.25 mm
- Working pressure – 15-30 psi
- Capacity of cup – 7 cc
- Supplied in plastic case complete with: Adjusting spanner , Pipette , Barbed hose connector
AB-17 Airbrush Stand
This handy table clamping stand can hold up to 2 airbrushes at a time.
This Airbrush Kit Includes
- TC-90T – Twin piston on-demand compressor with 3 litre air tank
- AB-24 – 1.8m braided air hose
- AB-130 – Gravity feed airbrush (0.25mm)
- AB-17 – Airbrush table clamping stand (Holds two airbrushes)