Description
This quick release coupling is screwed into the end of your 1/8 BSP air hose and by simply sliding the spring loaded fluted sleeve back, the airbrush is disconnected.
This item is self sealing when disconnected, preventing the need to remove air pressure from the hose before changing airbrushes.
The adjustable air control screw allows you to regulate the air pressure from 0-100%.
Please note that you will also need a suitable tail to connect your airbrush to the quick release body.
1/8 BSP (British Standard Pipe) measures approx 9mm diameter.
By adding a Quick Disconnect Plug adapter to your airbrush, this enables you to switch quickly to different airbrushes by plugging them in (see links below)
- Click here for a quick disconnect tail to fit 1/8 BSP airbrushes (Iwata, Harder & Steenbeck, Grex etc)
- Click here for a quick disconnect tail to fit Badger airbrushes
- Click here for a quick disconnect tail to fit Paasche airbrushes
- Click here for a quick disconnect tail to fit Aerograph airbrushes
Aerograph is a registered trademark of The Spraygun Company Limited.
Reviews
There are no reviews yet.