- Motor - 240V 50Hz 1Ph
- Power rating - 55W
- Rotational speed - 1400 rpm
- Maximum pressure - 40 psi
- 1/8 BSP male outlet
- Air displacement - 68 litres/min
- Weight - 4.5 kg
- Gravity feed cup
- Air regulator at airbrush
- Cut away handle for rapid clearing of nozzle blockages
- Working pressure - 15-30 psi
- Gravity feed double action airbrush
- Fluid nozzle - 0.25 mm
- Capacity of cup - 7 cc
- Adjusting spanner
- Barbed hose connector
- AS-06 - Diaphragm Compressor
- AB-24 - 1.8m Braided Air Hose
- AB-180 - Gravity Feed Airbrush (0.25mm)
- AB-15 - Airbrush Table Clamping Stand (Holds Four Airbrushes)
This completed kit comes with an Mini Diaphragm compressor, 1.8 metre braided air hose and a gravity feed AB-180 airbrush and airbrush stand.
An excellent starter kit for modelling or any of the following applications: cake decorating and any other fine detail applications.
AS-06 Mini Diaphragm Compressor
This is a continuously running compressor and the pressure is regulated down via a bleed valve regulator. The bleed valve must always be open to allow air pressure to escape when the airbrush is not in use.
Quiet (55db) - can be used unobtrusively in the home
Maintenance free diaphragm design with lightweight aluminium construction
Light and easy to transport
Pressure gauge and bleed valve regulator
Water trap and air filter
European customers can connect to EU mains by purchasing the following UK to EURO plug adaptor
AB-180 Gravity Feed Airbrush
With a double-action trigger to precisely control the air /paint mix, this professional quality airbrush is particularly suitable for detail design work. It is of all metal construction. This airbrush features an air control valve directly on the airbrush for superb control at your fingertips. Also the handle is of a cut away design, enabling rapid clearance of any fluid tip blockages.
Applications include, Model Painting, Body Art, Hobby and Craft, Fine Art, Car painting, Photo Retouching, Illustrations, Textiles and T-shirt painting.
This is a double action type of air brush, where pressing the trigger turns on the air and pulling the trigger operates the needle/tip valve which controls how much paint is released. These can work down to very fine lines (1mm or less) when you have reached the required skill level. The largest spray pattern is approx 40mm dependant on distance from the surface to be sprayed.
This airbrush has internal rubber seals and is not suitable for use with Solvent Based Paints.
AB-15 Airbrush Stand
This handy table clamping stand can hold up to 4 airbrushes at a time.