- Motor - 240V 60Hz 1Ph
- Power rating - 150W
- Air tank: 3.0L
- Maximum pressure - 87 psi
- 1/8 BSP male outlet
- Air displacement - 30 litres/min
- Weight - 7.2kg
- Gravity feed cup
- Air regulator at airbrush
- Cut away handle for rapid clearing of nozzle blockages
- Working pressure - 15-30 psi
- Gravity feed double action airbrush
- Fluid nozzle - 0.25 mm
- Capacity of cup - 7 cc
- Adjusting spanner
- Barbed hose connector
- AS-196 - Twin piston on-demand compressor (3 litre air receiver)
- AB-24 - 1.8m braided air hose
- AB-180 - Gravity feed airbrush (0.25mm)
- AB-15 - Airbrush table clamping stand (Holds four airbrushes)
This completed kit comes with an Twin Piston on-demand compressor, 1.8 metre braided air hose and a gravity feed AB-180 airbrush and airbrush stand.
An excellent starter kit for modelling or any of the following applications: Hobby and Craft, Fine Art, Illustration, Nail Art, Cake Decorating and many other fine detail airbrushing applications.
AS-196 Twin Piston Compressor with 3 Litre Air Tank
The AB-AS196 has a 3.0 litre receiver tank that has its pressure maintained automatically by the compressor. With a dual position switch, it is possible to select 2 modes of operation: In position 1,once it has reached an output pressure of 57 PSI it shuts off automatically and restarts when required. In position 2, the compressor will run continuously and reach a maximum pressure of 87 PSI.
Compact, portable and quiet (59db) it provides an oil free air supply that is ideal for designers, modellers, artists, cake decorators, nail art and spray tanning.
Quiet (59db) - can be used unobtrusively in the home
Maintenance free oil-less twin cylinder piston design with lightweight aluminium construction
3.0 litre Receiver tank - ensures pulse free pressure output
Constant pressure and Zero pulsation
Auto stop and start: Stops at 57 PSI, Starts at 35 PSI
Pressure gauge and Professional Regulator - fully adjustable to 0 psi
Water trap and air filter
Ideal for all airbrushes
European customers can connect to EU mains by purchasing the following UK to EURO plug adaptor
AB-180 Gravity Feed Airbrush
With a double-action trigger to precisely control the air /paint mix, this professional quality airbrush is particularly suitable for detail design work. It is of all metal construction. This airbrush features an air control valve directly on the airbrush for superb control at your fingertips. Also the handle is of a cut away design, enabling rapid clearance of any fluid tip blockages.
Applications include, Model Painting, Body Art, Hobby and Craft, Fine Art, Car painting, Nail Art, Photo Retouching, Illustrations, Textiles and T-shirt painting.
This is a double action type of air brush, where pressing the trigger turns on the air and pulling the trigger operates the needle/tip valve which controls how much paint is released. These can work down to very fine lines (1mm or less) when you have reached the required skill level. The largest spray pattern is approx 40mm dependant on distance from the surface to be sprayed.
This airbrush has internal rubber seals and is not suitable for use with Solvent Based Paints.
AB-15 Airbrush Stand
This handy table clamping stand can hold up to 4 airbrushes at a time.