|
|
| AB-21 Highly Flexible 1.8 meter Braided Rubber Air Hose
AB-21
This highly flexible braided rubber air hose is supplied with a 1/4" BSP Swivel nut one end, and our standard airbrush fitting the other. Should you wish to connect to our AB-128 or AB-138 models you will require our AB-128 adaptor.
Click here for a larger view
Price: £7.50 Including VAT at 17.5%
| |
|
|
|
| AB-21-3MTR Highly Flexible 3.0 meter Braided Rubber Air Hose
AB-21-3MTR
This highly flexible braided rubber air hose is supplied with a 1/4" BSP Swivel nut one end, and our standard airbrush fitting the other. Should you wish to connect to our AB-128 or AB-138 models you will require our AB-128 adaptor.
Click here for a larger view
Price: £8.50 Including VAT at 17.5%
| |
|
|
|
| AB-22 Coiled Nylon Air Hose - 1/8" BSP to AB series and Iwata
AB-22
This Coiled Nylon Hose fits all Iwata and our AB-Series airbrushes (AB-128 & AB-138 require AB-M538 adaptor). It is highly flexible, and stretches from around 40cm to over 1.8 metres!
Click here for a larger view
Price: £8.00 Including VAT at 17.5%
| |
|
|
|
| AB-22 Coiled Nylon Air Hose - 1/8" BSP to AB series and Iwata
AB-22-3-MTR
This Coiled Nylon Hose fits all Iwata and our AB-Series airbrushes (AB-128 & AB-138 require AB-M538 adaptor). It is highly flexible, and stretches from around 50cm to over 3 metres!
Click here for a larger view
Price: £8.50 Including VAT at 17.5%
| |
|
|
|
| AB-23 Highly Flexible 1.8 meter Rubber Braided Air Hose to suit Paasche
AB-23
This highly flexible braided rubber air hose is supplied with the fittings necessary to connect to Paasche airbrushes. The hose connects directly to the airbrush one end with a 1/8" BSP swivel nut the other, for connection to your compressor or air supply.
Click here for a larger view
Price: £4.99 Including VAT at 17.5%
| |
|
|
|
| AB-24 Highly Flexible 1.8 meter Rubber Braided Air Hose
AB-24
This highly flexible braided rubber air hose is supplied with the fittings necessary to connect to our AB-130, AB-130A, AB-132, AB-132A,AB-133, AB-135,AB-135A,AB-180 and AB-182 airbrushes. To connect to our AB-128 and AB-138 models, you will require our hose adaptor kit AB-M538, available separately.
The hose connects directly to the airbrush one end with a 1/8" BSP swivel nut the other, for connection to your compressor or air supply.
Click here for a larger view
Price: £7.50 Including VAT at 17.5%
| |
|
|
|
| AB-24-3MTR Highly Flexible 3.0 meter Rubber Braided Air Hose
AB-24-3MTR
This highly flexible braided rubber air hose is supplied with the fittings necessary to connect to our AB-130, AB-130A, AB-132, AB-132A,AB-133, AB-135,AB-135A,AB-180 and AB-182 airbrushes. To connect to our AB-128 and AB-138 models, you will require our hose adaptor kit AB-M538, available separately.
The hose connects directly to the airbrush one end with a 1/8" BSP swivel nut the other, for connection to your compressor or air supply.
Click here for a larger view
Price: £8.50 Including VAT at 17.5%
| |
|
|
|
| Flexible 8mm Bore x 5 Metre Long Polyurethane Hose - For Pneumatic Tools
EF-RPUA1.5.0500.BC4
This UK manufactured polyurethane air hose has a maximum working pressure of 18 BAR and will never perish. It is highly flexible with a high resistance to abrasion, paint and solvents. Each end features a 1/4" BSP brass swivel nut and nipple.
Do not confuse this hose with the much cheaper PVC or Rubber air hoses available - this one is of industrial quality, and will give many years of reliable service.
Use this hose as an extension to your airbrush hose and work well away from your noisy compressor! To do this you will require a 1/4"BSP male/male fitting.
Click here for a larger view
Price: £22.50 Including VAT at 17.5%
| |
|
|
|
| Precision CNC machined propellant can regulator - 1/8" BSP outlet
AB-CAN-ADAPTOR-1-8
This regulator is precision CNC machined by ourselves out of solid brass to give years of trouble free and leak free service. The 1/4" BSP outlet will fit any 1/8" BSP swivel nut hose (AB-22,AB-23 & AB-24).. It is also shown in service attached to an air can (not supplied with this item).
Click here for a larger view
Price: £7.50 Including VAT at 17.5%
| |
|
|
|
| Precision CNC machined propellant can regulator - 1/4" BSP outlet
AB-CAN-ADAPTOR
This regulator is precision CNC machined by ourselves out of solid brass to give years of trouble free and leak free service. The 1/4" BSP outlet will fit any 1/4" BSP swivel nut hose. It is also shown in service attached to an air can and hose (not supplied with this item).
Click here for a larger view
Price: £7.50 Including VAT at 17.5%
| |
|
|
|
| Precision CNC machined propellant can regulator - M5 outlet
AB-CAN-ADAPTOR-M5
This regulator is precision CNC machined by ourselves out of solid brass to give years of trouble free and leak free service. The M5 outlet will fit our AB-128, AB-138 and Badger small nylon hoses.
Click here for a larger view
Price: £7.50 Including VAT at 17.5%
| |
|
|
|
| Precision CNC machined Swivel Connector - 1/4" BSP male - female
OL-HF-SC-5001
This precision machined swivel connector is manufactured in the UK by ourselves. It allows 40 degrees total movement in any direction, and incorporates ptfe seals for super smooth leak free performance. With a 1/4" BSP swivel nut to attach to your air tool and a 1/4"BSP male fitting to attach to your hose. Ideal for reducing hose strain on all air equipment.
Click here for a larger view
Price: £8.99 Including VAT at 17.5%
| |
|
|
|
| Airbrush in-line moisture trap and air filter
AB-BD-12
This miniature in-line Pistol Grip Filter is the final defence to deliver clean, dry air to your airbrush. Miniature in size, the super-fine 5-micron filter element performs like a full size separator.
The clear filter bowl allows a visual inspection of built up moisture and is evacuated through a spring loaded release valve - without taking the filter off the airbrush.
Comfortable on the hand, the PistolGrip Filter acts as a handle on the airbrush to relieve muscle tension.
It will screw directly on to the following airbrushes:
All Iwata airbrushes
All Harder & Steeenbeck airbrushes (not Colani)
AB-130
AB-130A
AB-132
AB-132A
AB-133
AB-133A
AB-135
AB-135A
AB-180
AB-182
It will also fit Iwata airbrushes directly, our AB-128 via our AB-M538 adaptor and Badger airbrushes via our AB-M538-BADGER adaptor.
Click here for a larger view
Price: £9.99 Including VAT at 17.5%
| |
|
|
|
| Filter Regulator to suit Diaphragm type mini compressors
AB-AS-HS-F1
This bleed type filter regulator is a direct replacement for the one fitted to our AB-AS06 mini compressor and is suitable for all compressors with a 1/4" BSP male outlet.
Features:
1/4" BSP Swivel nut air inlet to attach to compressor
1/8" BSP Male outlet to attach suitable airhose
100 PSI (7 BAR) Pressure gauge
50 micron filter to remove particulates and moisture from air supply
One-touch water drain
Bleed type regulator to reduce pressure
Click here for a larger view
Price: £15.00 Including VAT at 17.5%
| |
|
|
|
| Professional Filter Regulator to suit Piston type mini compressors
AB-HS-F2
This professional type filter regulator is a direct replacement for the one fitted to our AB-AS18 and AB-AS186 mini compressors and is suitable for all compressors with a 1/4" BSP male outlet.
Click here for a larger view
Price: £15.98 Including VAT at 17.5%
| |
|
|
|
| PTFE Thread Seal Tape - 12m x 12mm x 0.075mm thick
RS-512-238
Wrap 2 or 3 turns of this PTFE tape around your hose fittings before assembly and achieve a perfect leak free joint. Saves wasted propellant, or unnecessary cycling of your compressor.
Click here for a larger view
Price: £3.50 Including VAT at 17.5%
| |
|
|
|
| Airbrush Hose Adaptor Kit 1/8" BSP - 1/4" BSP
ADAPTOR-KIT-1-4-BSP
This kit consists of 4 of the most common connectors required when connecting your airbrush hose to your compressor. We recommend the use of PTFE tape when using these adaptors to ensure a leak free joint, see our part number RS-512-238. The kit consists of the following items:
1/4" BSP male to 1/4" BSP male connector
1/4" BSP male to 1/8" BSP female connector
1/4" BSP male to 1/8" BSP male connector
1/4" BSP female to 1/8"BSP male connector
Click here for a larger view
Price: £8.99 Including VAT at 17.5%
| |
|
|
|
| 1/8"BSP Male-Male Adaptor
Use this 1/8" BSP Male-Male to connect multiple hoses to create a longer extension.
Click here for a larger view
Price: £1.50 Including VAT at 17.5%
| |
|
|
|
| Tyre Adaptor - Run your airbrush off a spare tyre!
OL-TYRE-ADAPTORKIT01
The tyre adaptor screws into the bottom of your propellant can regulator to enable you to run your airbrush off a suitably inflated spare tyre. Save on costly propellant cans!
This item will fit any of the propellant regulators we include in our kits, or the one we sell separately.
Click here for a larger view
Price: £3.50 Including VAT at 17.5%
| |
|
|
|
| AB-M538 Hose adaptor kit to suit AB-128 & AB-138
AB-M538
This kit will enable users of our AB-128 and AB-138 airbrushes to connect to our AB-SERIES flexible red braided rubber airhose. It is shown in use with an AB-138 in the large photo (note that the airbrush and hose are NOT included).
Click here for a larger view
Price: £2.50 Including VAT at 17.5%
| |
|
|
|
| Hose adaptor kit to suit Badger AIrbrushes
AB-M538-BADGER
This kit will enable users of Badger airbrushes to connect to our AB-SERIES flexible braided rubber airhoses. It is shown in use with an AB-138 in the large photo (note that the airbrush and hose are NOT included).
Click here for a larger view
Price: £2.50 Including VAT at 17.5%
| |
|
|
|
| Airbrush Quick Release Mini Coupling Body - 1/8" BSP
DHL-3-CT09-002-A
This connector is screwed into the end of your airhose and by simply sliding the spring loaded sleeve back, the airbrush is disconnected. This item is self sealing when disconnected, preventing the need to remove air pressure from the hose before changing air tools.
Please note that you will also need a suitable tail to connect to your airbrush. The larger photograph shows how the body is fitted between hose and airbrush (only the body is supplied, all other items are NOT included).
Click here for a larger view
Price: £9.99 Including VAT at 17.5%
| |
|
|
|
| Airbrush Quick Release Fitting Tail - 5mm Male To 1/8"BSP Female
ADAPTOR-ABA-71-BSP-KIT01
This connector is screwed onto your airbrush to enable connection to our Quick Disconnect Mini Coupling Body. It will fit the following airbrushes:
Iwata - all models
Harder & Steenbeck - all models except Colani
AB-105
AB-116
AB-116A
AB-128 (with AB-M538 adaptor kit)
AB-130
AB-130A
AB-132
AB-132A
AB-135
AB-135A
AB-138 (with AB-M538 adaptor kit)
AB-180
AB-182
AB-186
AB-206
AB-800
Please note that you will also need a Quick Release Mini Coupling Body to connect to your airhose.
Click here for a larger view
Price: £4.00 Including VAT at 17.5%
| |
|
|
|
| Airbrush Quick Release Fitting Tail - 5mm Male To Paasche
ADAPTOR-ABA-71-1/4-40-KIT01
This connector is screwed onto your airbrush to enable connection to our Quick Disconnect Mini Coupling Body. It will fit the following airbrushes:
Paasche - all models
Please note that you will also need a Quick Release Mini Coupling Body to connect to your airhose.
Click here for a larger view
Price: £4.00 Including VAT at 17.5%
| |
|
|
|
| Airbrush Quick Release Fitting Tail - 5mm Male To Badger
ADAPTOR-ABA-71-M5-KIT01
This connector is screwed onto your airbrush to enable connection to our Quick Disconnect Mini Coupling Body. It will fit the following airbrushes:
Badger - all models
AB-128
AB-138
Please note that you will also need a Quick Release Mini Coupling Body to connect to your airhose.
Click here for a larger view
Price: £4.00 Including VAT at 17.5%
| |
|
|
|
| Airbrush Quick Release Fitting Tail - 5mm Male To Aerograph
ADAPTOR-ABA-71-AEROGRAPH
This connector is screwed onto your airbrush to enable connection to our Quick Disconnect Mini Coupling Body. It will fit the following airbrushes:
Aerograph - all models
Please note that you will also need a Quick Release Mini Coupling Body to connect to your airhose.
Click here for a larger view
Price: £4.00 Including VAT at 17.5%
| |
|
|
|
| 3 Port Manifold - Run 2 Airbrushes from 1 supply
DHL-2-WAY-MANIFOLD
Use this connector to split your compressor outlet for the connection of 2 airbrushes. It has a 1/4"BSP or 1/8"BSP Female inlet to twin 1/8" BSP Male outlets.
Click here for a larger view
Price: £7.99 Including VAT at 17.5%
| |
|
|
|
| 4 Port Manifold - Run 3 Airbrushes from 1 supply
Use this connector to split your airline for the connection of 3 airbrushes.Precision CNC machined by ourselves in the UK, it has four 1/8"BSP Male connectors to attach your hoses, and two 5.2mm mounting holes to securely attach to your bench.
Click here for a larger view
Price: £5.99 Including VAT at 17.5%
| |
|
|
|
| 4 Port Manifold with 1/4 BSP Swivel Nut - Run 3 Airbrushes from 1 supply
Use this connector to split your 1/4 BSP Male compressor outlet into 3 1/8 BSP Male outlets for the connection of 3 airbrushes.Precision CNC machined by ourselves in the UK.
Click here for a larger view
Price: £6.50 Including VAT at 17.5%
| |
|
|
|
| 1/8 BSP Blanking Cap for 4 Port Manifold
Use this blanking cap when you only require two outlet hoses connected to either of our Four Port Manifolds. Precision CNC machined by ourselves in the UK, with internal O-ring seal for leak free performance.
Click here for a larger view
Price: £1.50 Including VAT at 17.5%
| |
|
|
|
| 5 Port Manifold - Run 4 Airbrushes from 1 supply
This aluminium manifold is fitted with 5 1/8" BSP outlets for connection to your airbrushes and compressor. It also features 2 mounting holes for screwing to your bench.
Please ensure that your compressor has sufficient air output if you intend operating more that 1 airbrush at a time.
Click here for a larger view
Price: £29.99 Including VAT at 17.5%
| |
