Everythingairbrush Respirators & Extractors

Product Sections

Best sellers

Createx Airbrush Cleaner
(Ref: SM-5618)

Finespray Nozzle Cleaning Reamer
(Ref: AB-470)

Sparmax Airbrush Cleaning Pot and Airbrush Stand
(Ref: DHL-SCP-700)

Airbrush Hose Adaptor Kit 1/8" BSP - 1/4" BSP
(Ref: ADAPTOR-KIT-1-4-BSP-)

Finespray Micro Cleaning Brushes
(Ref: AB-430)

Createx Opaque White
(Ref: AC-CTX-5212)

Everything Airbrush > Respirators & Extractors

Click here for a larger image..

Sparmax Spray Booth with Exhaust Fan & Pipe Ref: DHL-SB-88

Sparmax SB-88 is the essential tool for all airbrush users. The powerful fan system collects overspray, filters out the paint particles and easily vents emissions outside your work area. The dual-filter system serves as a blockade to effectively stop the paints for collecting inside the pipe.

The polypropylene spray booth is light in weight, about 20% lighter than current marketed models. The SB-88 is easy to assemble yet sturdy enough with its ABS strip frame and angle protection caps.
The rotating plate design is perfect for airbrush modellers as it allow you to spray on all sides of the artwork without touching the drying surface.

Direction-adjustable Pipe: Airflow 62-68 CFM. Noise Level: 62 dB
Replacement Dual-Filter Design with 1 Extra Filter Set
Built in Turntable
Size: L 52.3 x W 40.3 x H 31.6cm
Net Weight: 5.5kgs

Price: £119.99 Including VAT at 20%

OUT OF STOCK

Filter 2 (Small Particulate Filter) for Sparmax Spray Booth (Pack of 2) Ref: DHL-3-HA02-008-A

This pack of two replacement filters fit the Sparmax Spray Booth.

Price: £4.80 Including VAT at 20%

Filter 1 (Large Pre-Filter) for Sparmax Spray Booth (Pack of 2) Ref: DHL-3-HA02-009-A

This pack of two replacement pre-filters fit the Sparmax Spray Booth.

Price: £18.14 Including VAT at 20%

GraphicAir Model A300S-D Flexi-Ducted Extraction Cabinet with Spray Shield Ref: WSL-A300S-D

For aerosol spray and airbrush use. E.g. for applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. The unit will accommodate artwork up to A3 size.

FEATURES
The unit exhausts air via flexi-duct externally to atmosphere.

THIS UNIT IS MADE TO ORDER AND SENT DIRECT FROM SUPPLIER.

Price: £280.84 Including VAT at 20%

GraphicAir Model A300S Extractor Ref: WSL-A300S

These units are designed for immediate operator protection from airborne particulate matter, solvent vapour and gas. They are not recommended for continual usage, ie production applications, particularly in confined and/or badly ventilated work areas where potentially harmful solvent vapours and gases may accumulate

FEATURES
These units are recirculatory; i.e. filtered air is exhausted back into the workplace.

THIS UNIT IS MADE TO ORDER AND SENT DIRECT FROM SUPPLIER.

Price: £324.00 Including VAT at 20%

DeVilbiss "VALUAIR" Half Mask Respirator Ref: ITW-MPV-629

Lightweight, soft pliable facepiece
Easy bayonet fitting filter cartridges
Comfortable elasticated / moulded headstrap cradle
Replaceable A2 specification cartridges supplied as standard
Pre filters to extend the service of the main filter cartridges

Specifications:

Organic Vapour Boiling Point Above 650°C
Contamination Area Up to 10 x Occupational Exposure levels set by Health and SafetyExecutive
Suitablity Celluose paints, primers, lacquers and varnishes
Assigned Protection Factor 10

Price: £35.50 Including VAT at 20%

DeVilbiss Pair of Pre-Filter Covers + 10 Filter Pads Ref: ITW-MPV-492

Pair of pre-filter covers plus ten filter pads

Price: £21.84 Including VAT at 20%

DeVilbiss A2 Specification Filter Cartridges (Pack of 2) Ref: ITW-MPV-494-K2

Pack of two A2 specification filter cartridges

Price: £11.56 Including VAT at 20%

DeVilbiss "FREEDOM" Half Mask Respirator Ref: ITW-MPV-496

Lightweight, dual filter, semi-disposable half mask respirator
Can be used up to a maximum of 28 days
Maintenance free and requires no spare parts
Low nose bridge helps to accommodate goggles for optimum vision
Headstrap has no buckles or fasteners and is comfortable and easy to use

Specifications:

Organic Vapour Boiling Point Above 650°C
Contamination Area Up to 10 x Occupational Exposure levels set by Health and SafetyExecutive
Suitablity Celluose paints, primers, lacquers and varnishes
Assigned Protection Factor 10

Price: £22.68 Including VAT at 20%

DeVilbiss Protective Goggles Ref: ITW-MPV-4006

One piece protective goggles for use with half-mask respirators

Price: £21.42 Including VAT at 20%

Bodyshop Dust Respirator (Pack Of 15) Ref: 3M-06983

3M general purpose, lightweight pre-formed respirator features nose foam and adjustable nose clip.
Effective against workshop dust and grinding, and approved to EN149 to Class FFP1.
An economically priced respirator for good protection up to 4 x OEL.

Price: £19.14 Including VAT at 20%

Comfort Dust Repirator Ref: 3M-06910

Provides effective protection from lung-damaging fine dusts.
Approved to the European Standard for filtering facepiece particulate respirators FFP1 EN149:2001.

Price: £2.03 Including VAT at 20%

People who bought this item also bought:

1. Createx Airbrush Cleaner (Ref: SM-5618)

2. A2 Self Healing Cutting Mat (Ref: SL-KN6002)

3. Opaque Ultramarine 1oz (32ml) (Ref: HS-60010)

Maintenance Free Half Mask Respirator Ref: 3M-06941

The 3M 06941 is a maintenance free respirator offering protection when mixing paints and the application of coatings, adhesives and sealers.
Approved to European Standard EN405:2002

Price: £22.80 Including VAT at 20%

People who bought this item also bought:

1. Opaque Color Set (Set of Six 2oz Bottles) (Ref: SM-5803-00)

2. Createx Airbrush Cleaner (Ref: SM-5618)

3. Createx Illustration Base (Ref: SM-5608)

Premium Dust Respirator - Single Mask Ref: 3M-06922-K1

This popular, well proven design features a unique exhalation valve and adjustable nose clip for greater comfort in hot or humid conditions.
A valved, collapse- resistant respirator offering a high level of relief from lung damaging particles up to 10 x OEL.
Approved to European Standard EN149 to Class FFP2S

Price: £3.14 Including VAT at 20%

People who bought this item also bought:

1. Wicked Primary Set (Set of Six 2oz Bottles) (Ref: SM-W101-00)

2. Createx Airbrush Cleaner (Ref: SM-5618)

3. Airbrush No.4 Airbrush Paper 350 x 250mm (Ref: HS-170102)

Premium Dust Respirator (Pack Of 10) Ref: 3M-06922

This popular, well proven design features a unique exhalation valve and adjustable nose clip for greater comfort in hot or humid conditions.
A valved, collapse- resistant respirator offering a high level of relief from lung damaging particles up to 10 x OEL.
Approved to European Standard EN149 to Class FFP2S

Price: £29.60 Including VAT at 20%

Everything Airbrush > Respirators & Extractors