Tyre Pressure Adaptor Kit for Airbrush Propellant Can Regulators

Description

Convert a suitably inflated spare tyre into an economical, portable air source for your airbrush with this simple tyre adaptor kit. The adaptor screws into the bottom of any standard airbrush propellant-can regulator, allowing you to draw regulated air from a tyre on a rim instead of using single‑use propellant cans.

Key Benefits:

• Cost Saving: Use a properly inflated spare tyre instead of costly propellant cans.
• Simple to Fit: Screws into the regulator valve for an instant alternative air source.
• Portable & Practical: Useful for fieldwork or when propellant cans are unavailable.
• Universal Compatibility: Designed to work with all standard airbrush propellant can regulators.

Usage Notes & Requirements:

• Tyre must be mounted on a rim and inflated to 40 lbs (≈2.75 bar).
• Insert the adaptor into the regulator valve, then attach the regulator to the spare tyre valve.
• Check regulator and airbrush pressure settings before use.