Createx – 4030 Balancing Clear 4oz (120ml)

Description

Createx 4030 Balancing Clear is a versatile, water-based urethane resin used either as a paint additive or a clear inter-coat. It enhances adhesion, durability, and flow, making it a valuable tool for any custom paint or airbrush project.

---

1) As a Mixing Additive:

Add 4030 Balancing Clear at 10% by volume to any Createx paint to create an acrylic-urethane blend. This mixture will:

• Improve Adhesion & Durability: Increases mar resistance, especially on hard or non-porous surfaces.
• Enhance Flow: Improves leveling, edge retention, and decreases surface tension, allowing for heavier coats without cratering.
• Reduce Drying Times.

Note: When adding 4030 to paint, you’ll also increase its transparency. After mixing, thin with 4011 or 4021 Reducer and allow the paint 10 minutes to acclimate for optimal spray performance. This additive is not required for Scenix Mural & Theme Paint or AutoBorne Sealer.

---

2) As an Inter-coat Clear:

4030 Balancing Clear can also be used alone as a clear inter-coat or base coat. It dries to a satin finish and is water-resistant and suitable for prolonged exterior exposure when fully cured.

Application Tips:

• Thinning: Thin about 5% with 4011 Reducer.
• Spraying: Apply 2–3 medium coats using a 50/50 overlap pattern for even coverage.

Recommended Equipment:

• Airbrush: 0.5mm tip at 25–30 PSI
• Spray Gun: 1.2–1.3mm tip at 18–22 PSI inlet pressure

---

For more detailed information, refer to the 4030 Balancing Clear Tech Data Sheet.